New Roland DWX-4W

Condition : New

Cuttable material : Glass ceramics, Composite resin

Loadable workpiece shape : Width

Depth : Maximum 20 mm (0.79 in)

Height : Maximum 20 mm (0.79 in)

Operating speed : 6 to 1,800 mm/min. (0.24 to 70.9 in./min.)

Spindle motor : Jaeger high frequency spindle

Spindle speed : 15,000 to 60,000 rpm

Rotary axis travel angle : A axis

Number of burs housed : 4

Attachable bur : Shank diameter

Compatible compressed air* : Pressure

Air capacity : 114L/min (30gal) or more

Tank capacity : 33L (8.7gal) or more

Interface : USB

Control command set : RML-1, NC code

Power requirements:

AC 100 to 240 V ± 10%, 50/60 Hz , 1.9 A (overvoltage category II, IEC 60664-1)

Power consumption : Approx. 200 W

Operating noise : During operation

During standby : 48 dB (A) or less

External dimensions : Width x Depth x Height

Weight : 53 kg (116.8 lbs.)

Installation environment : Indoor use, Altitude

Temperature : 5 to 28 °C (41 to 82.4 F)

Relative humidity : 35 to 80 % (no condensation)

Ambient pollution degree : 2 (as specified by IEC 60664-1)

Short-term temporary overvoltage : 1,440 V

Long-term temporary overvoltage : 490 V

Included items :

Power cord, USB cable, Drain hoses, Detection pin, Dedicated milling burs, Automatic correction jig, Measuring cup, Hexagonal screwdriver, Hexagonal wrench, Mounting screws, Setup guide, Daily maintenance card, Roland Software Package CD, Spindle maintenance kit

System requirements for usb connection : Operating system

Usb cable : Use the included USB cable

Collet : Model #ZC-3JD

Additive : Model #ZAW-1000D

Filter for coolant tank : Model #ZF-CLD

Grinding bur : Model #ZGB-25D